Savin 4027 Manuale di Servizio Scaricare il pdf (Pagina 210)

100

101

10.15 LEAD EDGE ERASE MARGIN ADJUSTMENT

(SP2-101-001)

When: If the lead edge erase margin is not within the

adjustment standard.

Purpose: To maintain a proper lead edge erase margin.

Adjustment Standard:

2.5

1.5 mm (0.1

0.06")

How: SP2-101-001 changes the erase lamp off timing.

SP2-101-001: Lead Edge Erase

0 - 32 (default = 16, – 8.0 mm to + 8.0 mm), 0.5 mm per step

10.16 LENS HORIZONTAL H.P. ADJUSTMENT

(SP4-011-001~009)

When: If side-to-side registration is not within the

adjustment standard.

Purpose: To maintain proper side-to-side registration from

all feed stations.

Adjustment standard:

2 mm (0

0.08")

How: SP4-011-001~009 changes the lens horizontal

home position.

SP4-011-001~007 and 009 change the lens

horizontal home position used for certain units

(see step 3 below). If registration is not within

the standard when using a certain unit, use one

of these SP modes.

SP4-011-008 is the base adjustment made in

the factory. If this setting is changed by a small

amount, all other SP4-011 settings change

automatically by the same amount. Use this if

the image shift direction (to the front or to the

rear) is the same from all paper feed stations.

1. Make a full size copy from each paper feed station.

2. Check whether side-to-side registration is within the adjustment standard.

Rev. 7/95

Replacement &

Adjustment

FSM 5-63 A156/A160/A162

CÓPIA NÃO CONTROLADA

1 2 ... 205 206 207 208 209 210 211 212 213 214 215 ... 707 708

Commenti su questo manuale

Nessun commento

Savin 4027 Manuale di Servizio Pagina 210

Commenti su questo manuale

Prodotti e manuali riguardandi Apparecchi multifunzione Savin 4027